Transformer Sweep Frequency Response Analyzer
Product introduction
Transformer winding deformation tester for testing 6kV and above power transformers and other special purpose transformers, power transformers running or during transport will inevitably have to suffer the impact of a variety of short-circuit current fault or physical impact, in the short-circuit current Under the powerful role of electric power transformer windings may lose stability, leading to local distortion, drum kits and other permanent deformation or displacement phenomenon, which will seriously affect the safe operation of the transformer. According to the national power industry standard DL / T911-2004 winding deformation frequency response analysis using measurement transformer is a frequency response characteristics detected by the amplitude of each transformer winding, and the test results were vertical or horizontal comparison, according to the frequency response characteristic of change degree, determine the deformation of transformer windings may occur.
Features
1.Sweep method using the measured characteristics of the transformer winding, no transformer hanging hood, removable case, detected by amplitude frequency response characteristics of the windings of the transformer 6kV and more accurate measurement of distorted winding drum kits or shifted deformation.
2.Measurement speed, single winding for measuring time within three minutes.
frequency accuracy is very high, higher than the 0.001 percent accuracy.
digital frequency synthesis, higher frequency stability.
3.5000V voltage isolation, the full protection of computer security tests.
can be simultaneously loaded 9 curves, each curve related parameters are automatically calculated, automatically diagnose winding deformation, given the reference diagnostic conclusions.
4.Powerful software analysis, software, hardware indicators meet the national standard DL / T911-2004.
5.Software management humane, high intelligence, after the parameters are set, just press a button to complete all measurements.
6.Software interface is simple and intuitive, analysis, storage, export report, print menu glance.
Technical specification
Sweep Frequency Response Analyzers Test and analysis software main features
1.Using windows platform, compatible with Window 2000 / Window XP / Windows7 / windows8
2.Use the database to save test data, test data management simple and convenient.
can load 9 curves, each curve related parameters are automatically calculated, automatically diagnose winding deformation, given the reference diagnostic conclusions.
3.Software management Powerful, fully consider the needs of field use, the measurement data is automatically saved, exported automatically generate Word version of the test report (need to install the appropriate Office software) or JPG picture reports, user-friendly the test report.
4.Software obvious human characteristics, various conditions for the selection of the measurement of multiple items, do not do a lot of input in the field to use more convenient.
software high degree of intelligence, after the input and output signals are connected, just press a button you can do all the measurements.
5.Software interface is simple, intuitive and practical.
FAQ:
1. How can I choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
2. Does your price is competitive?
We have our own factory,we make sure to offer you the best quality with competitive price.
3. How can I pay?
We accept many payment term, such as T/T, Western Union…
4. When I receive it after pay?
Normal models can be delivered with 4-7days, please contact us to check transport time to your address.
5. How to deliver?
We can send by Express, by Sea and by Air.
7.What should I do if I do not know how to use?
We provide detailed operation instructions, operation videos, and engineer's online technical support.
8.What should I do if some parts broken?
We provide a 12-month warranty period and long-term maintenance services.
Product introduction
Transformer winding deformation tester for testing 6kV and above power transformers and other special purpose transformers, power transformers running or during transport will inevitably have to suffer the impact of a variety of short-circuit current fault or physical impact, in the short-circuit current Under the powerful role of electric power transformer windings may lose stability, leading to local distortion, drum kits and other permanent deformation or displacement phenomenon, which will seriously affect the safe operation of the transformer. According to the national power industry standard DL / T911-2004 winding deformation frequency response analysis using measurement transformer is a frequency response characteristics detected by the amplitude of each transformer winding, and the test results were vertical or horizontal comparison, according to the frequency response characteristic of change degree, determine the deformation of transformer windings may occur.
Features
1.Sweep method using the measured characteristics of the transformer winding, no transformer hanging hood, removable case, detected by amplitude frequency response characteristics of the windings of the transformer 6kV and more accurate measurement of distorted winding drum kits or shifted deformation.
2.Measurement speed, single winding for measuring time within three minutes.
frequency accuracy is very high, higher than the 0.001 percent accuracy.
digital frequency synthesis, higher frequency stability.
3.5000V voltage isolation, the full protection of computer security tests.
can be simultaneously loaded 9 curves, each curve related parameters are automatically calculated, automatically diagnose winding deformation, given the reference diagnostic conclusions.
4.Powerful software analysis, software, hardware indicators meet the national standard DL / T911-2004.
5.Software management humane, high intelligence, after the parameters are set, just press a button to complete all measurements.
6.Software interface is simple and intuitive, analysis, storage, export report, print menu glance.
Technical specification
| Measurement speed | single-phase winding 1.5 minutes to 3 minutes |
| Output voltage | Vpp-10V, the test is automatically adjusted |
| Output Impedance | 50Ω |
| Input impedance | 1MΩ (response channel built 50Ω matching resistor) |
| sweep range | 50Hz-2MHz or 50Hz-10MHz (optional) |
| Frequency accuracy | 0.001% |
| sweep mode | linear or logarithmic, sweep interval, and points can be set |
| curve shows | amplitude frequency curve (phase frequency curve, optional) |
| measuring wide dynamic range | -100dB ~ 20dB |
| supply voltage | AC220V ± 10% |
| Weight | 5kg |
Sweep Frequency Response Analyzers Test and analysis software main features
1.Using windows platform, compatible with Window 2000 / Window XP / Windows7 / windows8
2.Use the database to save test data, test data management simple and convenient.
can load 9 curves, each curve related parameters are automatically calculated, automatically diagnose winding deformation, given the reference diagnostic conclusions.
3.Software management Powerful, fully consider the needs of field use, the measurement data is automatically saved, exported automatically generate Word version of the test report (need to install the appropriate Office software) or JPG picture reports, user-friendly the test report.
4.Software obvious human characteristics, various conditions for the selection of the measurement of multiple items, do not do a lot of input in the field to use more convenient.
software high degree of intelligence, after the input and output signals are connected, just press a button you can do all the measurements.
5.Software interface is simple, intuitive and practical.
FAQ:
1. How can I choose the suitable one?
Please tell us your detailed requirements by mail or online, we will recommend the suitable one as your request.
2. Does your price is competitive?
We have our own factory,we make sure to offer you the best quality with competitive price.
3. How can I pay?
We accept many payment term, such as T/T, Western Union…
4. When I receive it after pay?
Normal models can be delivered with 4-7days, please contact us to check transport time to your address.
5. How to deliver?
We can send by Express, by Sea and by Air.
7.What should I do if I do not know how to use?
We provide detailed operation instructions, operation videos, and engineer's online technical support.
8.What should I do if some parts broken?
We provide a 12-month warranty period and long-term maintenance services.